How to steam a broom for a bath: features and methods

It is difficult to imagine a bathhouse without a broom assembled from birch, oak, eucalyptus or coniferous branches. With it, you can improve your health, but in order to achieve this effect, it is important to properly steam the broom. Each type has its own ways and features, considering which you can spend time in the steam room for the benefit of the soul and body.

Why is it important to follow the technology of steaming a bath broom?

It would seem, well, what could be easier than soaking a broom in a tub and then enjoying its aroma. But no! Each type of broom needs an individual approach. To reveal the maximum benefit for the body, it is important to consider the type of broom and a number of other features.

Otherwise, this may happen:

Birch broom: how to steam correctly and what you need to know?

Bath brooms made of birch are the most common, since it is not difficult to harvest them, and soaking them is a pleasure.

But there are a few things to keep in mind here:

1. For a steam room, only that broom is suitable, which is not overdried, and when shaking, small twigs and leaves do not crumble to a large extent.
2. There should be no signs of parasitic and fungal damage, including an unpleasant musty smell of rot or mold.
3. A freshly cut broom cannot be steamed, as high temperatures will completely kill all the benefits that are available in birch rods and sheets.
4. Before steaming a dry broom, be sure to wash off the dust under running water.
5. The lower the steaming temperature, the greater the health benefits in such a broom.

Birch broom heals skin lesions, promotes healing of wounds, and also suppresses infectious and inflammatory processes. With its help, sciatica and muscle spasms are successfully treated. Inhalation of vapors allows you to normalize metabolic processes in the respiratory system, and also helps to remove accumulated sputum in chronic broncho-pulmonary diseases.

cold method

From the point of view of medicine, this method of steaming a bath broom is considered the most correct.

Necessary:

1. Take a deep container so that the broom is completely immersed in the leafy part of the water.
2. Pour cold water, it's good if there is melted water.
3. Soak the broom for 10-12 hours, leaving it in a cool room.

After 12 hours, you will have an almost freshly cut bath broom in your hands, with which it is convenient and pleasant to spend time in the bath. The leaves will resume their natural color, and the branches - flexibility and elasticity.

The method is not laborious, but time consuming. If you don’t have a trip to the bathhouse planned, but you want to take a steam bath with a good birch broom, then the following method will do.

Steaming over the oven

The whole process will take no more than 5 minutes, for which you need:

1. Rinse the broom under running water.
2. Pour hot water into the basin so that the broom is completely immersed in it.
3. Next, immerse the broom in hot water for 15 seconds, then set it above the surface of the oven. Repeat the procedure 5-7 times.

Features of steaming over the oven

Drops of water falling on the heated surface create steam, under the influence of which the dead wood returns to life.

"Shock" steaming

It is also considered one of the fastest and most productive ways to make a broom soft and elastic. The method is based on the effect of temperature changes, which activates certain processes in cut branches.

The sequence of actions is as follows:

1. Prepare 2 containers: one with very hot water, the other with very cold.
2. Alternately dip the broom first in hot for 10 seconds, then in cold.
3. Repeat the procedure 10-15 times and after 5-7 minutes a fragrant, fluffy and flexible broom will open in your hands, which should then be used for its intended purpose.

Steaming by this method can be done directly in the bath. Some experts also practice this method: the broom is washed with cold water and taken out in the cold for 20-30 minutes. Then they bring it into the steam room and douse it with hot water, after which it is dipped in snow and immediately affects the body.

This method is especially good for those who have sensitive skin. The broom becomes incredibly tender and fragrant, and after its impact on the body there is no irritation.

Oak broom for a bath: how to steam and what methods are considered the best?

Unlike birch, the leaves of which are easier to steam, you will have to conjure over an oak broom. There are several ways to get an even, fragrant and beautiful broom, each with its own advantages and disadvantages.

Classic way

It is used only for oak broom, and in birch it causes abundant leaf fall.

Necessary:

1. Pour cold water into a deep container and soak the broom for 20 minutes.
2. Then drain the water and add hot water, but not boiling water.
3. After 5 minutes, the broom can be used for its intended purpose.

The oak leaf becomes soft and elastic, but at the same time does not lose its elasticity and does not come off the branches in the process. The tannins included in the composition will saturate the water, so for the purpose of healing it can be used to wash the head and body.

Steaming in the pelvis

The method is good for quick steaming when a trip to the bath was not planned.

The sequence of actions is as follows:

1. Take two metal deep basins that fit a broom in size.
2. Pour boiling water into the bottom of one basin.
3. Place a grate or some kind of support on top, spread out a broom.
4. Place a basin on the stove so that hot water begins to boil and release steam.
5. Cover with a second basin on top to enhance the greenhouse effect.
6. After 5-7 minutes, the broom will be completely ready.

To further speed up the process, before steaming, the oak broom can be soaked for 5 minutes in very cold water.

The method is good for relatively fresh blanks, but for overdried ones it will be rather weak.

Express steaming

The method is ideal for those brooms that are frankly overdried and there is a risk that the foliage will fall off when wet.

For steaming you need:

1. Put the broom in warm water for 2 minutes.
2. Carefully remove it, but do not shake off the water.
3. Bring it under the hot stones and lightly and gently shake it so that the dripping water forms steam.

In 5 minutes you will have a completely ready-to-use bath accessory. The work should be done carefully so that the oak leaves do not fall on the coals, otherwise the aroma will not be the most pleasant.

Spruce brooms for a bath: features and methods of steaming

The needles of spruce branches contain substances that increase immunity, suppress the bacterial flora in the body and contribute to the activation of metabolic processes. Such a broom is a real storehouse of health benefits, but it also needs to be steamed in a special way.

For a couple

This method helps to reveal all the benefits contained in the needles, as well as prevent its shedding.

Need:

1. Dip the broom in cold water for 5 minutes.
2. Pour boiling water into a deep container and cover it with a broom.
3. Top with a towel.
4. Let stand 10-15 minutes, changing sides of steaming.

Moisture gradually activates the processes in the green needles, and the resins from the twigs are released in moderation.

If the broom is prepared 10-20 days before use, then you can not steam it, but simply bring it into the steam room and let it lie there for 20-30 minutes.

The effect of shock steaming for coniferous brooms is not used due to the high probability of dropping needles.

Steaming in hot water

If the broom is old enough, and the needles have become very prickly, then soaking it in hot water will help. To do this, pour water into the basin, put a broom there and leave for 20-30 minutes. Every 5-7 minutes, the broom should be changed sides.

Before immersing a broom in water, it must warm up well and undergo thermal adaptation. If this is not done, then there is a risk that the needles will crumble.

Features of steaming herbal brooms

If for you going to the bathhouse is not only relaxation, but also a way to become healthier, medicinal herb brooms will help with this.

The most popular of them are:

1. From nettle - treats sciatica and various joint pains, removes salts, removes abscesses on the skin.
2. From sage and chamomile - improves skin condition by normalizing the functioning of the sebaceous glands.
3. From bitter wormwood - treats hundreds of diseases, including insomnia, severe headaches and parasitic infections on the skin.

Therefore, there are several effective ways:

1. For a couple - a broom is moistened with cold water, a deep basin is taken, boiling water is poured into it, a grate is placed on top. A broom is placed on it and covered with a bath towel. Let it lie down for 10-20 minutes, changing sides.
2. in the steam room - a broom is simply dipped in warm water, after which it is placed in the steam room on a towel.
3. Soaking in cold water - softens the broom, preventing it from crumbling. Retains all the nutrients inside the plant.

It is not recommended to soak herbal brooms for a long time. Water will remove all the benefits, leaving you with only lifeless sticks.

Questions and answers

Summing up, it is worth saying that the quality of a bath broom is not only in its proper steaming, but also in the preparation. If the drying process is disturbed, then there is a risk that when it enters the bath, the foliage will simply crumble. Each type of raw material has its own requirements, compliance with which will allow you to get a good and high-quality tool from hundreds of diseases.

Video advice on how to properly steam a broom for a bath